Ubiquiti UniFiU6+ Accesspoint WiFi

Description

Ubiquiti UniFiU6+ Accesspoint WiFiis now available and Closer to you in Nairobi CBD at PengTech Solutions your Shoppers place for Genuine and Quality products for your work, school or home use

The Access Point WiFi 6 Pro (U6 Pro) is a high-performance, dual-band WiFi 6 access point that is ideal for usage in large offices.

With its 5 GHz (4×4 MIMO) and 2.4 GHz (2×2 MIMO) bands, the U6 Pro can achieve an aggregate
throughput rate of up to 5.3 Gbps, allowing it to accommodate over 300 concurrently connected clients while ensuring an even, dependable
wireless experience throughout your entire network.
It can also isolate your guest traffic for maximum security and performance. The U6 Pro also supports full 4×4 MIMO with 160 MHz channels,
resulting in high-capacity wireless uplinks and quicker data transfer.
The UniFi Network application* allows it to be set up in minutes and completely managed.
Network application* allows it to be set up in minutes and completely managed.

Ubiquiti UniFiU6+ Accesspoint WiFi Key Features

Dual-band WiFi 6 (802.11ax)
5 GHz (4×4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2×2 MU-MIMO and OFDMA) band with a 573.5 Mbps throughput rate
Operates at full 4×4 MIMO with 160 MHz bandwidth
300+ concurrent client capacity
Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion
Included universal mounting plate, backing plate, and screw kit

Hardware

Management interfaces: Ethernet, Bluetooth
Networking interface: (1) GbE RJ45 port
Button: Factory reset
LED*: White/blue
Power method: 802.3at PoE+
Software

WiFi standards: 802.11a/b/g
WiFi: 4/WiFi 5/WiFi 6
Wireless security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID: 8 per radio
VLAN: 802.1Q
Advanced QoS: Per-user rate limiting
Guest traffic isolation: Supported
Concurrent clients: 300+
Zero wait DFS: Yes*

*Supported with upcoming firmware versio Power method: 802.3at PoE+
Power supply: UniFi PoE switch, 48V, 0.5A PoE adapter (not included)
Supported voltage range: 44 to 57VDC
Max. power consumption: 13W
Max. TX power: 2.4 GHz, 22 dBm / 5 GHz, 26 dBm
MIMO: 2.4 GHz, 2 x 2 (UL MU-MIMO) / 5 GHz, 4 x 4 (DL/UL MU-MIMO)
Throughput rate: 2.4 GHz, 573.5 Mbps / 5 GHz, 4.8 Gbps
Antenna gain: 2.4 GHz, 4 dBi / 5 GHz, 6 dBi
Mounting: Wall/ceiling (included)
Operating temperature: -30 to 60° C (-22 to 140° F)
Operating humidity: 5 – 95% noncondensing
Certifications: CE, FCC, IC

*Due to chip supply shortages, the U6 AP’s LED has been limited to only white and blue color modes